All Custom Hangar

Boeing 747 Fender® Stratocaster® Guitar - White

"667066010646"

$4,500.00

When Boeing set its sights on creating an iconic commercial jetliner, it created the Boeing 707. When Fender® sought to create an iconic electric guitar, it brought the Stratocaster® into existence. Both brands have made their mark in historical fashion with two epic products, paving the way for others in the worlds of aviation and music. Boeing and Fender® have joined forces to celebrate their achievements. Behold, the Fender® Boeing 747 Stratocaster®. A nod to the history made by the 707, Boeing has incorporated retired fuselage skin from its equally iconic 747 “jumbo jet”. These Boeing-exclusive guitars have pickguards that carry a piece of history with them. Consider this a living, breathing work of art that will only get better with time.

Boeing 747 Fender® Stratocaster® Guitar - White

Boeing 747 Fender® Stratocaster® Guitar - Blue

"667066010645"

$4,500.00

When Boeing set its sights on creating an iconic commercial jetliner, it created the Boeing 707. When Fender® sought to create an iconic electric guitar, it brought the Stratocaster® into existence. Both brands have made their mark in historical fashion with two epic products, paving the way for others in the worlds of aviation and music. Boeing and Fender® have joined forces to celebrate their achievements. Behold, the Fender® Boeing 747 Stratocaster®. A nod to the history made by the 707, Boeing has incorporated retired fuselage skin from its equally iconic 747 “jumbo jet”. These Boeing-exclusive guitars have pickguards that carry a piece of history with them. Consider this a living, breathing work of art that will only get better with time.

Boeing 747 Fender® Stratocaster® Guitar - Blue

Boeing 727-200 Nose-Gear Table

"667066010505"

$5,900.00

This stunning contemporary table has a beauty that is more than skin deep. The table top is made from the gently curved nose-gear door from a 727-200 airliner that has been carefully cleaned and buffed and topped with a sheet of polished glass set above the door surface. The world-famous 727 trijet debuted many technological innovations that are still in use today: it was the first Boeing jetliner to have completely powered flight controls, the first to undergo rigorous fatigue testing, the first to have triple-slotted flaps, and the first to use an auxiliary power unit. The base and legs of this table are custom-crafted from maple wood with a natural oil stain and dovetail detailing. Certificate of Authenticity is included. Measures 54.5"L x 22.5"W x 30"H. Total weight 103 lb. Made in USA. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.* This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

Boeing 727 American Flag Table - Port Side

"667066010410"

$12,500.00

This historical artifact is a unique symbol of American ingenuity. The centerpiece is an American flag decal cut from the fuselage of a retired Boeing 727 jetliner, the first trijet in commercial service. The flag has been clear-coated for protection, placed within a 1/4" brushed aluminum frame with a clear-coated matte finish, and topped with a 3/8" tempered-glass tabletop resting on adhesive-backed cushions. This museum-quality piece would be a striking addition to your home of office and a lasting reminder of American leadership in aviation. A Custom Hangar plaque is attached to the underside of the table, and it comes with a Certificate of Authenticity. Actual flag decal may vary slightly from photograph. Measures 52"L x 37"W x 18"H. Weighs approximately 110 lb. Made in U.S.A. NOT FOR FLIGHT USE.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

Boeing 727 American Flag Table - Port Side

Boeing 727 American Flag Table - Starboard Side

"667066010411"

$12,500.00

This historical artifact is a unique symbol of American ingenuity. The centerpiece is an American flag decal cut from the fuselage of a retired Boeing 727 jetliner, one of the best-selling commercial transports in history. Because the flag decal was cut from the starboard side, it is reversed, according to protocol. The flag has been clear-coated for protection, placed within a 1/4" brushed aluminum frame with a clear-coated matte finish, and topped with a 3/8" tempered-glass tabletop resting on adhesive-backed cushions. This museum-quality piece would be a striking addition to your home of office and a lasting reminder of American leadership in aviation. A Custom Hangar plaque is attached to the underside of the table, and it comes with a Certificate of Authenticity. Actual flag decal may vary slightly from photograph. Measures 52"L x 37"W x 18"H. Weighs approximately 110 lb. Made in U.S.A. NOT FOR FLIGHT USE.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

Boeing 727 American Flag Table - Starboard Side

Boeing 727 Radio Magnetic Indicator 2

"667066010355"

$950.00

Take home a memento of one of the most beloved airliners in history. The Boeing 727 trijet, designed for smaller airports and shorter runways than the 707 jetliner, had a distinctive T-tail with three rear-mounted engines. Boeing built more than 1,830 of the popular jets in several configurations. This artifact is a radio magnetic indicator (RMI) from a 727 instrument panel. The RMI displays an aircraft's magnetic heading and relative bearing to automatic direction finder (ADF) and VHF omnidirectional range (VOR) navigation signals. This piece has been refinished by hand and set in a bracket and base made from hand-polished aircraft-grade aluminum. A Boeing Custom Hangar plaque is attached to bottom of the base. Certificate of Authenticity included. Each piece is unique and may vary slightly from photograph. Measures approximately 8"L x 7"W x 8"H. Made in U.S.A. *NOTE: This artifact is sold "as is" with no guarantee that parts maintain original function. Not for flight use.*

Boeing 727 Rudder Pedal Plaque

"667066010462"

$2,500.00

The 727 jetliner, which took its first flight in 1963, was designed to serve smaller airports with shorter runways than those used by the earlier 707. Although many in the industry thought the proposed plane was a risky proposition, Boeing ultimately produced more than 1,800 of the popular jets. The 727 can be distinguished from other Boeing commercial airplanes by its T-shaped tail and three rear-mounted engines. This artifact is a genuine 727 jetliner rudder pedal on a custom mounting. Rudder pedals are standard airplane components that control the rudder, a moving surface on the vertical stabilizer. The rudder helps control the yaw, or left-right nose direction, of the plane. The rudder pedal has been cleaned and polished and attached to a 1/2"-thick sheet of hot-rolled steel with a plywood backing covered in black felt. A photograph of a 727 set in a 6" by 8" clear acrylic sandwich frame with aluminum standoffs is mounted next to the pedal to complete this museum-quality display. The entire assembly has a stainless-steel French cleat on the back for hanging and an attached Custom Hangar plaque. Certificate of Authenticity included. Measures approximately 18"H x 22"W. Weighs approximately 15 lb. Made in U.S.A.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Boeing 737-300 Fuselage Wall Sign

"667066010437"

$7,500.00

The Boeing 737 is inarguably the best-selling jetliner of all time. As of 2012, the 737 fleet had carried more than 16.4 billion passengers -- at that time, the equivalent of every man, woman, and child in the world flying at least twice. Now you can own a gorgeous memento of this remarkable plane. Our craftspeople carefully removed a large fuselage section bearing the Stratotype identifier from a retired 737-300, polished it by hand, and fastened it to a satin-finish aluminum frame. The frame can be securely mounted to a wall using the attached stainless-steel cleat system. A Custom Hangar plaque is attached to the back, and the piece comes with a Certificate of Authenticity. Measures approximately 7'7"L x 15"H x 2.5"D. Weighs approximately 38 lb. Made in U.S.A. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Boeing 747-200 JT9D Engine Reversible Table

"667066010509"

$3,900.00

The Boeing 747 has reigned as Queen of the Skies for more than 45 years. It is still among the most recognizable and beloved airliners flying today. This novel table is made out of titanium spacer rings from one of the four big Pratt & Whitney JT9D engines that once powered a Boeing 747-200. The titanium pieces have been assembled into an hourglass shape that is topped with a polished round glass tabletop. The reversible table base has a purple metallic coloration on one side and blue on the other, so the base can be turned over for a different look and color scheme. Certificate of Authenticity is included. Table measures 23.5"H x 24" in diameter without glass. Total weight 37 lb. Made in USA. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.* This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

Boeing 747-200 JT9D Engine Reversible Table

B-29 Superfortress Fuel Gauge Indicator

"667066010094"

$950.00

Boeing submitted the prototype for the B-29 long-range heavy bomber to the Army in 1939, before the United States entered World War II. The B-29 used the high-speed Boeing 117 airfoil, and its larger Fowler flaps added to the wing area as they increased lift. Modifications led to the B-29D, upgraded to the B-50, and the RB-29 photo reconnaissance aircraft. The B-29 was the first aircraft to have a dedicated Flight Engineer to operate and manage all flight system through a separate control panel due to the complexity of the aircraft. Fuel tanks in the wing of the B-29 provide an overall normal capacity of 5608 U.S. gallons (4669 Imperial). However, the capacity may be increased to a maximum of 9501 U.S. gallons (7912 Imperial) by the installation of auxiliary wing and bomb bay tanks. The fuel gauge indicator, operated by the flight engineer, gave readings in gallons for each of the four engines. Each engine could be monitored individually with the flip of a switch. This instrument has been hand refurbished and set in a housing made from plasma cut 11-gauge hot rolled steel, in a shape inspired by Boeing prop planes build in the early 1940's. It has been hand polished and powder coated with a vintage smoke clear finish to stay true to the B-29 era. Certificate of Authenticity included. May vary slightly from photograph. Measures approximately 11.5"L x 8.5"W x 8"H. Specially priced-no discounts may be applied. Made in U.S.A. NOT FOR FLIGHT USE.

B-52 Stratofortress Engine Spinner Coffee Table - Wood

"667066010388"

$8,500.00

The beauty of this stunning table is more than skin-deep. At its center is a salvaged engine spinner from a mighty Boeing B-52 Stratofortress bomber. Powered by eight Pratt & Whitney TF-33 turbofan engines, this 390,000-pound jet was the United States' first long-range, swept-wing heavy bomber. The bullet-shaped engine spinner is a fairing placed over the center of the engine to reduce drag and smooth airflow for more efficient air intake. This artifact saw thousands of hours of service and has been stripped, cleaned, and hand-polished to a mirror finish and fitted with a solid mahogany frame and glass top. Custom Hangar plaque and Certificate of Authenticity included. Measures 31"H x 37" in diameter overall; table top height 19". Weighs 52 lb. Made in U.S.A. *NOTE: This artifact is sold "as is" with no guarantee that parts maintain original function. Not for flight use.* This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

B-52 Stratofortress Engine Spinner Coffee Table - Wood

B-52 Stratofortress Engine Spinner Coffee Table - Metal

"667066010431"

$9,500.00

The sleek Art Deco lines of this table show the true beauty of aerodynamic design. At the center of the table is an actual engine spinner from a mighty Boeing B-52 Stratofortress bomber. Powered by eight Pratt & Whitney TF-33 turbofan engines, this 390,000-pound jet was the United States' first long-range, swept-wing heavy bomber. The bullet-shaped engine spinner is placed over the center of the engine to reduce drag and smooth airflow for more efficient air intake. This artifact saw thousands of hours of service and has been stripped, cleaned, and hand-polished to a mirror finish, then fitted with a glass top and machined aluminum frame that echoes aircraft structure design and hardware. Custom Hangar plaque and Certificate of Authenticity included. Measures 31"H x 37" in diameter overall; table top height 19". Weighs approximately 30 lb. Made in U.S.A. *NOTE: This artifact is sold "as is" with no guarantee that parts maintain original function. Not for flight use.* This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

B-52 Stratofortress Engine Spinner Coffee Table - Metal

Boeing 727 JT8D Engine Titanium Stool

"667066010563"

$1,850.00

Best seat in the house! The Boeing 727 was the most produced airliner of its time, the first to reach the 1,000-sales mark, and the first to carry 1 billion passengers. Boeing built more than 1,800 of the versatile trijets, some of which are still in service today as cargo planes. This artifact is a stool constructed from titanium engine spacers removed from Pratt & Whitney JT8D turbofan engines that once powered a 727 jetliner. Our craftspeople cleaned and polished the spacers and fitted them with a custom-upholstered black leather seat to create a comfortable and eye-catching piece of aviation memorabilia. A Certificate of Authenticity is included. Made in USA. Measures 17"H x 16" in diameter. Weighs approximately 16 lb. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.* This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

Boeing 727 JT8D Engine/Cockpit Gauge Sculpture

"667066010562"

$950.00

The legendary 727 jetliner, which took its first flight in 1963, was designed to serve smaller airports with shorter runways than those used by the earlier 707. Although many in the industry thought the proposed plane was a risky proposition, Boeing ultimately produced more than 1,800 of the popular trijets. This artifact is constructed from a segment of a titanium spacer ring from a 727 Pratt & Whitney JT8D engine. Our craftspeople cleaned and polished the ring, fitted it with a custom laser-cut stainless-steel back panel and base, and bolted three 727 cockpit gauges onto the back panel to create a one-of-a kind piece that brings an artistic sensibility to aviation history. In addition to the stainless-steel base, the piece includes a hanger hole on the back so that it can be hung on a wall or set on a desk or shelf. A Certificate of Authenticity and Custom Hangar keychain are included. Different pieces will feature different cockpit gauges and may vary from photograph. Made in USA. Measures 8"H x 2.5"D. Weighs approximately 7 lb. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.*

Boeing 727 JT8D Engine/Cockpit Gauge Sculpture

F-4 Phantom II Landing Gear Door - Gry/Blk

"667066010427"

$7,500.00

This unique artifact, made from a genuine F-4 Phantom II front landing gear door, shines a light on aviation history. The two-seat F-4 Phantom II twinjet was one of the most versatile fighters ever to serve the military. Built by McDonnell Aircraft in St. Louis, it boasted top speeds more than twice the speed of sound and became the U.S. Navy's fastest, highest flying, and longest range fighter. Both the Navy Blue Angels and Air Force Thunderbirds flight demonstration teams flew the F-4 during the 1970s. This salvaged door has been cleaned; upgraded with new wiring, lights, and a switch; and encased in a 1/8" hot-rolled-steel shadow box. A cleat on the back allows it to be mounted on a wall. Gray, natural lacquer, and black finishes. Measures 32.25"H x21.25"W x 6.5"D . Weighs approximately 45 lb. Made in U.S.A.

F-4 Phantom II Landing Gear Door - Gry/Blk

F-4 Phantom II Landing Gear Door - Gry/Red

"667066010428"

$7,500.00

This unique artifact, made from a genuine F-4 Phantom II front landing gear door, shines a light on aviation history. The two-seat F-4 Phantom II twinjet was one of the most versatile fighters ever to serve the military. Built by McDonnell Aircraft in St. Louis, it boasted top speeds more than twice the speed of sound and became the U.S. Navy's fastest, highest flying, and longest range fighter. Both the Navy Blue Angels and Air Force Thunderbirds flight demonstration teams flew the F-4 during the 1970s. This salvaged door has been cleaned; upgraded with new wiring, lights, and a switch; and encased in a 1/8" hot-rolled-steel shadow box. A cleat on the back allows it to be mounted on a wall. Gray, red, natural lacquer, and black finishes. Measures 32.25"H x21.25"W x 6.5"D . Weighs approximately 45 lb. Made in U.S.A.

F-4 Phantom II Landing Gear Door - Gry/Red

F-4 Phantom II Landing Gear Door - Green

"667066010426"

$7,500.00

This unique artifact, made from a genuine F-4 Phantom II front landing gear door, shines a light on aviation history. The two-seat F-4 Phantom II twinjet was one of the most versatile fighters ever to serve the military. Built by McDonnell Aircraft in St. Louis, it boasted top speeds more than twice the speed of sound and became the U.S. Navy's fastest, highest flying, and longest range fighter. Both the Navy Blue Angels and Air Force Thunderbirds flight demonstration teams flew the F-4 during the 1970s. This salvaged door has been cleaned; upgraded with new wiring, lights, and a switch; and encased in a 1/8" hot-rolled-steel shadow box. A cleat on the back allows it to be mounted on a wall. Camouflage green, natural lacquer, and black finishes. Measures 32.25"H x21.25"W x 6.5"D. Weighs approximately 45 lb. Made in U.S.A.

F-4 Phantom II Landing Gear Door - Green

Airplane Sculpture 3

"667066010398"

$200.00

This handmade sculpture is a unique tribute to the age of aviation. Genuine parts from Boeing commercial airplane engines have been assembled into the shape of classic biplane. The fuselage is a bolt from a 747 Pratt & Whitney JT9D engine; other parts are from a 727 Pratt & Whitney JT8D engine. Components are made from steel, Inconel 718 nickel alloy, and Greek Ascoloy chromium-nickel-tungsten martensitic alloy. Each piece is unique and may vary slightly from photograph. Measures 7"L x 8"W. Weights 1 lb. Made in U.S.A.

F-4 Phantom Instrument Panel 4

"667066010442"

$950.00

Looking at this genuine instrument panel from a McDonnell F-4 Phantom II fighter, you can almost hear the roar of the jet's mighty engines. The two-place, all-weather F-4 Phantom II twinjet, which first flew in 1958, had a top speed more than twice that of sound. It was one of the most versatile fighters ever built, serving in the first line of more Western air forces than any other jet. The F-4 is remembered today as the quintessential American fighter. Our craftspeople carefully removed instruments from a retired F-4, inspected, cleaned, and polished them, and set them into a custom housing made from plasma-cut 11-gauge hot rolled steel. The housing was hand polished and coated with a vintage-look smoke-tinted clear powder finish. The matching base was machined to resemble airplane skin, complete with rivets. This handsome piece is a fitting tribute to a legendary plane. A Custom Hangar plaque is affixed to the display, and a Certificate of Authenticity is included. Measures approximately 11.5"L x 8.5"W x 8"H. Weighs approximately 15 lb. Made in U.S.A. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.*

F-4 Phantom Instrument Panel 4

"667066010123"

$950.00

The McDonnell two-place, twinjet, all-weather F-4 Phantom II had top speeds more than twice that of sound. In 1961, It was the U.S. Navy's fastest, highest flying fighter with the longest range. It flew concurrently with the U.S navy, Air Force, and Marine Corps. Both the Navy Blue Angels and the Air Force Thunderbirds flew the F-4 from 1969 to 1973. Last Delivery of the F-4 was in 1979, and 5,195 were built. It was retired from the U.S. service in 1996 after flying more than 17 million miles. This instrument is from an F-4 Phantom II fighter that took its first flight in 1958. It has been hand refurbished and set in a housing made from plasma cut 11-gauge hot rolled steel, in a shape inspired by jet-engine aircraft. It has been hand polished and powder coated with a vintage smoke clear finish to stay true to Military Applications. Certificate of Authenticity included. May vary slightly from photograph. Measures approximately 11.5"L x 8.5"W x 8"H. Specially priced-no discounts may be applied. Made in U.S.A. NOT FOR FLIGHT USE.

North American F-100 Super Sabre Ejection Seat

"667066010416"

$19,500.00

Take your place where few have had the privilege of sitting. This artifact is a genuine ejection seat from a North American Aviation F-100 Super Sabre fighter jet. The sleek swept-wing supersonic fighter served the U.S. Air Force from 1954 to 1974 and the National Guard until 1979. Later models of the F-100 had a top speed of more than 1,000 miles per hour (1609.3 km per hour), and earlier models set the world's first supersonic speed records. This gun-catapult ejection seat has been professionally cleaned and refurbished with durable Sunbrella fabric, then fitted into a sturdy steel base with adjustable feet and a hand-applied blackened finish. The seat is supported by vertical I-beams with the same black finish. A Custom Hangar plaque is affixed to the underside of the base, and a Certificate of Authenticity is included. Measures 56"H x 44"D x 37"W. Crated weight approximately 465 lb. Made in U.S.A. NOT FOR FLIGHT USE. This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

North American F-100 Super Sabre Ejection Seat

F-4 Phantom J79 Engine Blade

"667066010516"

$110.00

Despite its slightly bulky appearance, the McDonnell F-4 Phantom II had a top speed more than twice the speed of sound, leading some to observe that it represented "the triumph of thrust over aerodynamics." The much-loved twinjet served in the first line of more Western air forces than any other jet after it entered service in 1961. This artifact is a genuine engine blade from a General Electric J79 turbojet engine that powered an F-4 Phantom II. It has been cleaned and polished and placed on a specially crafted aluminum base that has been powder-coated for a matte black finish. The Custom Hangar logo is laser-etched on the underside, and a Certificate of Authenticity is included. Actual engine blade may vary slightly from photograph. Measures approximately 4"H x 3" in diameter. Weighs 6 oz. Made in USA. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.*

Boeing B-52 J57 Engine Blade 4in

"667066010568"

$110.00

The Boeing B-52 Stratofortress heavy bomber entered service with the US Air Force in 1955, and the big four-engine jet is still in service today. This desktop-sized sculptural piece is an actual engine blade from a Pratt & Whitney J57 (JT3C) axial-flow turbojet engine used on a B-52. The J57 was the first 10,000 pound-force thrust class engine in the US inventory. The 4.25"-high blade has been cleaned and polished and placed on a specially constructed aluminum base with a matte black powder-coat finish. A Certificate of Authenticity is included, and the Custom Hangar logo is laser-etched on the underside of the base. No two pieces are exactly alike. Measures approximately 4.25"H overall x 3" in diameter. Weighs approximately 1 lb 11 oz. Made in USA. *NOTE: This artifact is sold as is with no guarantee that parts maintain original function. Not for flight use.*

North American F-86 Rudder Pedal Plaque

"667066010461"

$2,500.00

The North American F-86 Sabre Jet was the first swept-wing fighter in the U.S. inventory. The snub-nosed jet attained a stunning victory ratio of 10 to 1 against Russian-built MiG fighters during the Korean War. North American built more than 6,000 F-86s before U.S. production ended in 1956. This artifact is a genuine F-86 Sabre Jet rudder pedal on a custom mounting. Rudder pedals are standard airplane components that control the rudder, a moving surface on the vertical stabilizer. The rudder helps control the yaw, or left-right nose direction, of the plane. The rudder pedal has been cleaned and polished and attached to a 1/2"-thick sheet of hot-rolled steel with a plywood backing covered in black felt. A photograph of the F-86 set in a 6" by 8" clear acrylic sandwich frame with aluminum standoffs is mounted next to the pedal to complete this museum-quality display. The entire assembly has a stainless-steel French cleat on the back for hanging and an attached Custom Hangar plaque. Certificate of Authenticity included. Measures approximately 18"H x 22"W. Weighs approximately 18 lb. Made in U.S.A.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Boeing 737 Engine Coffee Table

"667066010265"

$9,500.00

The Boeing 727 and 747 jetliners each revolutionized passenger flight, making round-the-world travel a possibility for more people than ever before. This elegant table is made from recycled 727 and 747 parts, including elements from Pratt & Whitney JT8D and JT9D jet engines. These genuine parts, made from Ti-6Al-4V titanium alloy and Inconel 901 nickel alloy and other materials, have been cleaned and polished and topped with a one-half-inch-thick round glass table surface. Certificate of Authenticity included. Each piece is unique and may vary slightly from photograph. Measurements: Top 42" in diameter; overall height 20.5". Weighs 200 lb. Made in U.S.A. NOTE: This artifact is sold "as is" with no guarantee that parts maintain original function. Not for flight use. Contains heavy metal and glass parts; small children should be supervised. This item will incur additional shipping/handling charges after ordering. We will contact you to make arrangements.

Boeing 747-100 Rudder Pedal Plaque

"667066010451"

$2,500.00

The Boeing 747 first flew in 1969, and the Queen of the Skies quickly became an aviation icon and one of the most recognizable-and beloved-airplanes in the world. The 747 development team, under the leadership of chief engineer Joe Sutter, was known as "The Incredibles" for completing the first revolutionary 747 in less than 16 months. This artifact is a genuine 747-100 jetliner rudder pedal on a custom mounting. Rudder pedals are standard airplane components that control the rudder, a moving surface on the vertical stabilizer. The rudder helps control the yaw, or left-right nose direction, of the plane. The rudder pedal has been cleaned and polished and attached to a 1/2"-thick sheet of hot-rolled steel with a plywood backing covered in black felt. A photograph of a 747 set in a 6" by 8" clear acrylic sandwich frame with aluminum standoffs is mounted next to the pedal to complete this museum-quality display. This special edition includes a custom plaque honoring Joe Sutter, the father of the 747. The entire assembly has a stainless-steel French cleat on the back for hanging and an attached Custom Hangar plaque. Certificate of Authenticity included. Measures approximately 18"H x 22"W. Weighs approximately 15 lb. Made in U.S.A.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Boeing 747-400 Rudder Pedal Plaque 1

"667066010453"

$1,950.00

The Boeing 747 first flew in 1969, and the Queen of the Skies quickly became an aviation icon and one of the most recognizable-and beloved-airplanes in the world. The 747 development team, under the leadership of chief engineer Joe Sutter, was known as "The Incredibles" for completing the first 747 in less than 16 months. The 747-400 rolled out in 1988 and featured 6'-high winglets to reduce drag. This artifact is a genuine 747-400 jetliner rudder pedal on a custom mounting. Rudder pedals are standard airplane components that control the rudder, a moving surface on the vertical stabilizer. The rudder helps control the yaw, or left-right nose direction, of the plane. The rudder pedal has been cleaned and polished and attached to a 1/2"-thick sheet of hot-rolled steel with a plywood backing covered in black felt. A photograph of a 747 set in a 6" by 8" clear acrylic sandwich frame with aluminum standoffs is mounted next to the pedal to complete this museum-quality display. The entire assembly has a stainless-steel French cleat on the back for hanging and an attached Custom Hangar plaque. Certificate of Authenticity included. Measures approximately 18"H x 22"W. Weighs approximately 15 lb. Made in U.S.A.

⚠WARNING! This product can expose you to the chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Douglas DC-8 Co-Pilot Yoke 1

"667066010419"

$2,400.00

For everyone who has ever dreamed of taking control of a mighty jetliner, we present this genuine co-pilot yoke from a Douglas DC-8 narrow-body plane. The DC-8, the first Douglas jet-powered transport, was powered by four jet turbine engines and could reach speeds of more than 600 miles per hour. Seven variants of the DC-8 were produced between 1958 and 1972, for a total of 556 airplanes in all; several hundred are still in service. This yoke, one of a limited number available, has been cleaned, refurbished, and set on a polished aluminum stand for display in your home or office. A Custom Hangar plaque is attached to the underside of the base, and a Certificate of Authenticity is included. Actual piece may vary slightly from photograph. Measures approximately 14" x 12" x 17". Weighs approximately 9 lb. Made in U.S.A. NOT FOR FLIGHT USE.

SIGN UP AND SAVE 15%